Wood Grain Finishes

The beauty of wood without the maintenance

The Decoral wood grain system has developed the highest quality powders, inks, films and equipment that, when combined, create high-resolution image and beauty in architectural design. Ordinary materials come to life in splendid color and impeccable wood grain lines, stimulating the imagination and uplifting the spirit with impeccable quality and definition.

Decoral wood grain finishes have been subjected to the most demanding testing for durability, ruggedness, chemical and weather resistance. The results of this testing allow for a long term warranty in most indoor and outdoor environments.

Extrusion - 24 ft max
Flat sheet - 4' X 12'

Advantages of Decoral Wood Grain

Decoral wood grain

Weather and humidity proof

Corrosion resistant

Fire retardant

No maintenance required

High UV resistance

Easy to fabricate

High scratch resistance

Does not swell, rot or warp

Less costly than wood

Termite and insect proof

Wood Grain Selection

With over fifty options and ranges in wood patterns, Linetec has selected the following AAMA-2604 texure wood grain finishes as our standard palette, however we can provide other wood grain, marble, granite, or custom design that you'd like.

* Finishes may vary in tone and color within the same wood grain.

Decoral Wood Grain - American Douglas
American Douglas    DS716S  +  1501/02

Decoral Wood Grain - American Maple
American Maple    DS733S  +  1102/01

Decoral Wood Grain - Cherry
Cherry    DS733S  +  1402/02

Decoral Wood Grain - Cherry with flame
Cherry with Flame    DS733S  +  1401/01

Decoral Wood Grain - Colony Maple
Colony Maple    DS716S  +  1101/02

Decoral Wood Grain - Dark Walnut
Dark Walnut    DS733S  +  1802/02

Decoral Wood Grain - European Cherry
European Cherry    DS716S  +  1406/01

Decoral wood grain finishes

The Decoral System

The Decoral dye sublimation process is a heat transfer system, that is based on the physical reaction that makes the inks, from a solid stage, become gas and again a solid. At the precise temperature and pressure, the pigment inks transfer from the paper support and move into the synthetic layer of Decoral powder, fixing the original color and position into it.

Decoral products are constantly submitted to the most severe durability tests both in the laboratories and in outdoor exposure including the Florida test fence.

The Linetec wood grain process uses the AAMA 2604 Gold Series Decoral powder coatings.

To Make Note Of

  • Wood grain coatings starting with a DS700 number signify a texture coating
  • Wood grain coatings starting with a DS400 number signify a smooth coating
  • The S at the end of the DS700 powder coat number signifies that an AAMA 2604 Gold Series powder coat is used
  • The AAMA-2604 Gold Series powder coat system is only available in the texture coatings
  • Smooth and texture coatings are available in the AAMA-2603 powder coat system
  • Texture coatings tend to be more durable, scratch resistant and less transparent
  • Smooth coatings have a much higher gloss and reflectivity

Decoral Wood Grain - Golden Oak
Golden Oak    DS733S  +  2505/01

Decoral Wood Grain - Knotty Pine textured
Knotty Pine     DS716S  +  2103/01

Decoral Wood Grain - National Walnut
National Walnut     DS733S  +  1806/02

Decoral Wood Grain - Oak texture
Oak     DS716S  +  2301/02

Decoral Wood Grain - Oregon Douglas
Oregon Douglas     DS716S  +  1502/02

Decoral Wood Grain - Table Cherry
Table Cherry     DS716S  +  1405/02

Decoral Wood Grain - Teak
Teak     DS733S  +  2601/01

Contact us to inquire about a Sample

Complete all information, listing the entire name and code of the wood grain sample you are interested in.