ON-SITE REPAIR.
& RESTORATION SERVICES.
UNPARALLELED QUALITY.

ON-SITE REPAIR AND RESTORATION

Linetec delivers a full array of services including On-Site Repair and Restoration for Architectural, Commercial and Residential Projects, including USGBC LEED certified projects and the Living Building Challenge projects. Linetec’s fully-staffed field service team specialists utilize both solvent and water-based PVDF resin-based air-dry coatings to offer restoration services of unparalleled quality.

LINETEC RESTORATION WATER-BASED PVDF RESIN-BASED COATINGS

These coatings are used on a building's exterior or interior, including such materials as:

Windows and Doors

architectural panels and accents

fences and gates

Site Furnishings

curtain wall

Cladding AND COPINGS

Storefronts

Roofing and Fascias

Skylight and canopies

railings and a wide vaRiety of other metal structures

Linetec On-site repair and restoration services

MEETS U.S. Green Building Council’s LEED® Green Building Rating System™

The water-based, environmentally responsible coating system was created to meet the interior specifications for the Green Seal® Standard and the U.S. Green Building Council’s LEED® Green Building Rating System™.  For more than 40 years PVDF resin-based finishes have held the position as the world’s premiere exterior metal finish. ADS paints with PVDF resin-base offer the same superior weathering properties as PVDF coatings, applied in-house by an approved applicator, and can be field applied on almost any aluminum building material, restoring surfaces to last and look like new.

The tough properties of PVDF resin-based ADS coatings resist marring and abrasion, withstand airborne pollution without staining or discoloring, and retain their excellent appearance over time. The coatings require little maintenance and can be easily cleaned with mild detergents. For any repair other than a small scratch or blemish, we strongly suggest our Linetec field service department inspect the situation and determine the best suitable paint or repair procedure. Surface preparation, application, and finish should all be properly executed for a long lasting finish. A minor mistake in any segment of repair will cause major problems over time.

Linetec On-site repair and restoration services

FINISHING AND RESTORATION PROFESSIONALS

On-site refinishing and restoration of architectural projects require specialized equipment, professional people, and specific knowledge that only come with years of experience.

As projects like these typically are performed on occupied buildings, Linetec’s field service team will minimize disruptions with appropriate scheduling, doing repairs or repaint day or night, around the buildings schedule. Our professionals possess the knowledge and skill to confidently guarantee the projects refinishing or restoration

PROject qualifications

Whether your buildings finish has faded and discolored, or your new building has been damaged during construction, we can correct it. Specializing in the repair of construction damage, including bondo repair for dents and miss-drilled holes, as well as refinish of premature chalk and fade, Linetec can bring your buildings back to their original splendor.

Potential field repair projects

Freight damage, graffiti removal, anodize refinishing, ding and dent repair, metallic field finishing, interior or exterior repair, etc., would all qualify as potential field repair projects.

request job-site visit or quotation

To request a job-site visit or quotation contact Linetec’s Field Service Manager, at 715-846-3638, or email our Field Service department at fieldservice@linetec.com.

Linetec warranty

On-site project warranties vary greatly depending on the project. Any job requiring Linetec field repair because of a Linetec finish issue is warranted in parallel with the Linetec factory warranty.

Field projects not caused by Linetec are warranted on an individual basis. Linetec’s typical warranty for field finishing is 5 years from date of completion, with a 1 year workmanship warranty. Warranty is dependent upon the base metal condition, base finish condition, site location, type of damage, etc. Warranties can range from no warranty to warranties that parallel the original factory finish warranty. Linetec will consider supplying a special ten-year warranty in some cases.

REQUEST A QUOTE

In most cases, our estimators will produce your quote within 24 hours. Requesting a quote can be made on-line on our website, by e-mail to sales@linetec.com, or also by faxing Linetec at 1-800-236-2589.
LEARN MORE

INDUSTRY LINKS

Beyond high-performance fluoropolymer paint, architectural anodize, and powder coating Linetec offers several unique finishing solutions that can be a distinctive design solution for your project.
LEARN MORE

ENVIRONMENTAL COMMITMENT

Linetec has earned a long-standing reputation as a leader in environmentally-conscious practices and finishing options. For more than a decade, environmental responsibility has been written into our core values.
LEARN MORE

RESOURCE CENTER

Our technical experts at Linetec provide valuable industry education of high-performance architectural finishes to architects, engineers, specifiers and manufacturers.
LEARN MORE

Photo credits: Linetec